Abstract
In order to increase the hardness and wearproof of magnesium alloy parts it is necessary to use protective coatings. These surface layers were formed by plasma electrolytic oxidation (PEO) in the electrolyte containing nanosized particles of titanium nitride. X-ray photoelectron spectroscopy and Raman spectroscopy showed the presence of TiN, TiOxNy, and TiO2 compounds in the composition of the PEO-layer. Oxidation of TiN in TiOxNy and TiO2 was realized during the PEO treatment. It has been shown that the best protective mechanical properties are attributed to the coatings formed in electrolytes with TiN concentrations of 2–3 g/l. Mechanical properties of the obtained layers have been studied. It has been established that the hardness of nanoparticles-containing coatings is twofold higher in comparison with the PEO-coating formed in the base electrolyte; its wear resistance increases in 2.2 times. Thus, the incorporation of TiN nanoparticles into the composition of the PEO-coating improves significantly mechanical properties of the surface of magnesium alloys. This, in turn, makes it possible to expand the field of application of these materials in such industries as aviation, automotive, development of high-tech products and devices.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.