Abstract
PurposeTo investigate the graft diameters and mechanical properties of hamstring tendons sutured using different materials and techniques.MethodsThis study used 30 fresh, frozen human cadaveric semitendinosus tendons; the free ends of 10 specimens each were sutured by 2 No. 3 braided polyester sutures with the Krackow technique (BP group), SutureTape with the Krackow technique (ST group), or SutureTape Loop with the locking SpeedWhip technique (SL group). First, the changes in graft diameter from before suturing to after suturing were investigated. Each graft was pre-tensioned to 100 N for 3 cycles and then cyclically loaded to 200 N for 200 cycles. Elongation after cyclic loading and displacement in the 200th cycle were calculated. Finally, each specimen was loaded to failure. The ultimate failure load and stiffness were analyzed. These mechanical properties were statistically analyzed using 1-way analysis of variance. The level of statistical significance was set at P < .05.ResultsIn the BP group, the changes in graft diameter were significantly larger than those in the ST and SL groups (P = .001). The elongation values after 200 cycles in the BP and ST groups were 3.1 ± 2.0 mm and 5.9 ± 3.4 mm, respectively. In the SL group, elongation (7.7 ± 3.6 mm) was significantly larger compared with that in the BP group (P = .037). In contrast, displacement in the 200th cycle was significantly smaller in the ST and SL groups compared with the BP group (P = .017). No statistically significant difference was evident for the ultimate failure loads among the 3 groups (P = .543).ConclusionsThe results of this study suggest that SutureTape may be an appropriate option for preparing the hamstring graft in anatomic anterior cruciate ligament (ACL) reconstruction.Clinical RelevanceThis biomechanical study shows the effectiveness of SutureTape in ACL graft preparation. Clinically, SutureTape may be of benefit in single- or double-bundle ACL reconstruction.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.