Abstract
In this work, a kind of magnetic photonic crystal fiber (MPCF) design based on yttrium iron garnet (YIG) structure filled with magnetic fluid (MF) is presented. In order to improve the magneto-optical (MO) properties of isolator devices, a numerical study has been developed to investigate the non-reciprocal TE-TM mode conversion. This technique consists in producing, under the influence of a magnetic field parallel to the direction of propagation, a coupling between the modes. The influence of gyrotropy and MF infiltration at different magnetic nanoparticle volume fraction concentrations is investigated. The results revealed that the mode conversion efficiency (Rm) increases with the increase of the MF concentration, while modal birefringence (∆n) is inversely proportional to its increase. Thus, the higher concentration provides the best results. For MF concentration and gyrotropy equal respectively to 1.75% and 0.0125, Rm is improved to over 93%, and ∆n is reduced to close to 10–6. Whereas, Rm decreases to 89.59 and ∆n increases to 6 × 10–6 for MF concentration equal to 0.25%. From these results, it can be seen that this MPCF filled with MF concentration equal to 1.75% is well suited to the design of MO isolators.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.