Abstract
PLZT9/65/35 thick films were prepared from the solution containing PVP360 (polyvinylpyrrolidone, with average molecular weight of 360000). With the solutions, the critical thickness of a single PLZT layer could increase to ~624nm compared with 77nm-thick films prepared without PVP360. Furthermore, by adding 20~35% excess of Pb to the precursor solutions, the nano-porous rosette-like structures and a small amount of pyrochlore remnant, which were found very common in the PVP-modified films, could be eliminated. 35% Pb excess was also found to initiate liquid-phase sintering, leading to dense and crack-free films. The effect of Pb excess on the rosette removal and densification behavior of the films was discussed. Moreover, the optical and electrical properties of the PLZT films with 35% Pb excess were also studied.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.