Abstract
Volmer–Weber type island growth mode was adopted to form nano-sized metal particles embedded in a dielectric matrix by the alternate deposition of metal and dielectric layers. Particle size and volume fraction were controlled by changing the nominal thickness of the metal layer and its ratio to that of dielectric layer, respectively. For comparison, the Au cluster formation was investigated in detail in both co-sputtered and alternatively sputtered films. Plan-view and cross-sectional transmission electron microscopy experiments combined with the optical absorption near the surface plasmon band show that well-defined Au metal spheres can be obtained by alternating sputtering, while closely spaced small particles, some connected and losing their sphericity even in the small volume fraction, are formed in the co-sputtered films. Their size was controlled by the volume fraction. The optical constants of the alternatively sputtered composite films were determined from spectroscopic ellipsometry measurements through the Maxwell–Garnett effective medium model fitting, considering the size dependent mean free path limitation of the free electrons. There was good agreement between simulated and measured optical spectra for the as-grown films.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
