Growth and some surface characterization of tin Sulphide (SnS) thin film by two-electrode cell arrangement for photo absorption

Abstract

This study presented deposition of tin sulphide (SnS) thin film using a two-electrode electrochemical cell arrangement. The bath electrolyte comprised tin sulphate (SnSO4 ), hydrated sodium thiosulphate (Na2S2O3∙5H2O) and sulphuric acid (H2SO4 ). The acid was used to adjust the pH of the bath. The deposited film was characterised using Surface Profilometer, X-Ray Diffractometer (XRD), Uv-Visible Spectrophotometer and four point probe technique. Surface profiling revealed that the film is continuous with thickness of about 60 nm. The XRD result showed that the film has orthorhombic crystal structure. Film's crystallite size was estimated as 0.61 nm and interplanar spacing as 0.29 nm. The Uv-visible Spectrophotometer result reveals that, the film has good absorbance but poor reflectance and transmittance in the visible light region. The film has direct allowed transition with energy band gap of 1.69 eV. Values of surface resistivity and conductivity were deduced from data obtained from Four-point probe studies as 5.12 x 10-4Ω-cm and 1.96 x 103Ω-1cm-1 respectively. The I-V characteristics curve of ITO/SnS/Ag structure is linear indicating an Ohmic contact between the substrate electrode and the deposited layer. It can therefore be suggested that the film can allow pathway for photoabsorption and also aid charge transfer in photovoltaic process.
 Keywords: tin sulphide, orthorhombic, electrochemical deposition, characterization, photovoltaic and surface resistivity.