Ground water flow parameterization of an Appalachian coal mine complex.

Abstract

We examined a large (240 km2) northern Appalachian bituminous coal basin (Irwin Syncline, Westmoreland County, Pennsylvania) comprising 27 mine complexes with nine major (> 2.5 x 10(3) L/min) discharges. The synclinal basin was divided into seven subbasins based on equilibrium hydraulic relationships established during the past 25 years. Recharge rates, mine pool velocity, and residence times respond to hydraulic changes in the overburden induced by mine subsidence. The estimated maximum depth for subsidence fractures is 60 m (30 times mined thickness) with recharge rates decreasing significantly in subbasins with thicker overburden (> 75 m). Calculated subbasin recharge rates range from 2 to 6 x 10(-4) L/min/m2 and are significantly lower than the previously used rate for the basin. Residence time of ground water in the Irwin subbasins calculated using average linear velocity ranged from one to five years and were more consistent with field observations than estimates obtained using discharge and basin volume area. A positive correlation (r2 = 0.80) exists between net alkalinity of the mine water-impacted discharges and residence time in the mine pools. Our results for the Irwin coal basin suggest that use of a subbasin approach incorporating overburden depth, mining methodology, and the extent of postmining inundation will lead to improved determination of ground water flow parameters in mined watersheds in northern Appalachia and elsewhere.