Ground Subsidence and Surface Cracks Evolution from Shallow-Buried Close-Distance Multi-seam Mining: A Case Study in Bulianta Coal Mine

Abstract

To explore the law of ground deformation from shallow-buried close-distance multi-seam mining, an observation station was built in the Bulianta Coal Mine to measure and record the periodic variation of related parameters about ground subsidence and surface cracks with the advancement of working face. From the data observed from the field, it can be found that, when lower seam mining, the ground subsidence above the previously mined area was deeper and steeper than that above the left pillar; besides, the influence scope of the former was larger than that of the latter. In terms of ground cracks, the ground cracks were formed ahead of the working face and developed rapidly during the period of the breakage of the immediate roof. Besides, the average interval of the ground cracks above the previous gob was 14.75 m, and still existed and hardly changed after the advancement of the working face; while that above the left pillar was 27.8 m and most of them were closed. In addition, when the advance rate of the working face was 12.8 m/day, the advance influence distance of the mining surface crack reached the minimum of 13.6 m. This finding is helpful for protecting the surficial environment in mining area during and after mining operations and is also of significance to conduct green mining in other mining areas.