Green synthesis of porous graphene and its application for sensitive detection of hydrogen peroxide and 2,4-dichlorophenoxyacetic acid

Abstract

This work presented a facile and green method to prepare porous graphene (PGR) using a combination of sodium citrate treatment, hydrothermal reduction and lyophilization. The structure of the obtained PGR was analyzed by X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), and the morphology was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Furthermore, this PGR was used as the support for the immobilization of catalase. Fourier-transform infrared spectroscopy (FT-IR) spectra indicated that the immobilized catalase kept its structure without any change. Electrochemical impedance spectroscopy and cyclic voltammetry indicated the fast electron transfer between the immobilized catalase and the glassy carbon electrode (GCE). This biosensor showed a linearity in the 1.0 × 10−7 ∼ 7.7 × 10−6 mol L−1 concentration range with a low detection limit of 83.0 nmol L−1 (3δ/S) for H2O2. In addition, the biosensor was also applied to measure 2,4-dichlorophenoxyacetic acid (2,4-D) concentration based on catalase enzymatic inhibition. Under the optimized conditions, two linear relationships of the inhibition ratios vs. the 2,4-D concentrations ranging from 2.4 × 10−9 ∼ 2.6 × 10−8 mol L−1 and 2.6 × 10−8 ∼ 3.6 × 10−7 mol L−1 were found. The detection limit for 2,4-D was down to 1.5 nmol L−1 at 3δ/S. The inhibition constants (Ki) of 2,4-D to the immobilized catalase was calculated to be 6.50 × 10−8 mol L−1. This biosensor was applied for the determination of H2O2 and 2,4-D in real samples with satisfactory results.