Abstract

Direct dyes are used in different textile operations and processings. The textile industries are disposing of unused direct dyes into the aquatic environment which is posing a serious alarming threat to aquatic lives. The current study deals with the synthesis of nickel oxide nanoparticles using Allium cepa peels aqueous extract. Nickel oxide nanoparticles (NiO-NPs) were characterized by scanning electron microscopy (SEM). Synthesized NiO-NPs were used to remove Congo red direct dye. Various experimental factors like concentration of dye and nanoparticles, pH, and temperature were optimized. Congo red direct dye was decolorized up to 90% at optimized conditions (Congo Red Direct dye concentration 0.02%, catalyst dose 0.003 g·L-1, pH 6, and temperature 50 °C). The real textile industry effluent disclosed 70% decolorization at optimized conditions. The percent reduction in total organic carbon (TOC) and chemical oxygen demand (COD) was found to be 73.24% and 74.56% in the case of Congo red dye catalytic treatment and the percent reduction in TOC and COD was found to be 62.47% and 60.23%, respectively, in the treatment of textile effluent using nickel oxide nanoparticles as a catalyst. Treated and untreated dye samples were exposed to Fourier transform infrared (FTIR) and UV-Visible spectral analyses too. The reaction products were studied by degradation pathway.

Highlights

  • In the first part of this study, nickel oxide (NiO) nanoparticles were synthesized using onion peels aqueous extract. These NiO nanoparticles were used to degrade Congo red direct dye following the optimization of reaction conditions

  • Characterization of nickel oxide nanoparticles The synthesized nickel oxide nanoparticles (NiO-NPs) were characterized by scanning electron microscopy (SEM), which showed that nickel oxide nanoparticles were spherical and cubic (Figure 2)

  • Optimization of experimental conditions for decolorization of Congo red direct dye In part two, the study was done with Congo red direct dye to optimize various physico-chemical parameters to evaluate maximum decolorization of dye under investigation

Read more

Summary

Introduction

Water is a great blessing for us. It is used as a solvent in many industrial operations and functions. A change in water quality is an alarming threat to the environment (Kiran et al 2012). 7 lac tones of dyes are produced all over the world (Padhi 2012). Various industries including textile, tanning leather, paper, pulp mills etc. Major source of environmental pollution is textile industry wastewater because it contains non-biodegradable synthetic dyes

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call