Abstract
BackgroundThere is a need to develop low-cost, reliable and portable devices to enhance the efficiency of microextraction techniques in complex samples. Metal-organic frameworks (MOFs) have proven to be promising sorbents due to their well-documented properties. However, their green preparation and combination with paper-based substrates have not been satisfactorily explored to fabricate sustainable sorptive phases. ResultsIn this work, the hybridization of a paper substrate (as a sustainable support) with MOFs (as a sorptive phase) was carried out by one-pot approach. Concretely, the selected MOF, MIL-53(Al), was in-situ growth onto the paper surface in aqueous solution without the need for high temperature or pressure, thereby aligning with the Green Analytical Chemistry principles. The optimized composite (MIL-53(Al)@cellulose paper) was characterized and evaluated as extraction sorbent for five neonicotinoids (NEOs) (thiamethoxam, clothianidin, imidacloprid, acetamiprid, and thiacloprid). Furthermore, its feasibility was demonstrated by isolating these pollutants from environmental water samples, followed their determination by HPLC coupled to diode array detection. The whole method showed satisfactory analytical performance with recoveries between 86 and 114 %, suitable precision (with RSD lower than 14 %), and limits of detection ranged from 1.0 to 1.6 μg L−1. Besides, the greenness of the method was assessed by application of different existing metrics. The developed extraction device was affordable (<0.08 €/device) and mechanical and chemically stable, being possible its reuse more than 11 cycles, thus demonstrating its suitability for rapid screening of pesticides in environmental samples. SignificanceThis report presents, for the first time, the green synthesis of MIL-53(Al)cellulose paper composite and its application as a sorptive phase for the extraction of NEOs from environmental water samples. We believe that the proposed strategy for fabricating these sustainable paper-based sorptive phases paves the way for further hybridizations with other MOFs or materials. Additionally, it opens up large possibilities for their application in extraction of pollutants or other hazardous compounds in aquatic environments.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.