Abstract
The use of alternative raw materials is essential for establishing a circular economy in the mineral and ironmaking sectors. Therefore, this study investigates the potential of lime sludge as fluxing material during pelletization and proposes an alternative route for the usage of waste. The pellets were manufactured with different binary basicity values (CaO/SiO2) (0.15-0.45) and bentonite (0.5-0.7 wt%) and fixed carbon (0.5-1.1 wt%) contents. The results demonstrated that lime sludge has significant potential for application in pelletization. Pellet quality was evaluated using drop number, mechanical strength, tumble index, porosity, and kinetic analyses. Pellets with the optimal composition using lime sludge withstood 3.6 drops/pellet, a tumble test of 1.57 wt.%, and a mechanical strength test of 214.83 kgf/pellet and exhibited a porosity of 31.28%. Lime sludge did not influence the reducibility of the iron-ore pellets. In the temperature range of 800-900 °C, the reaction was controlled by diffusion, with Ea between 179.89 and 233.10 kJ/mol.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
