Green fabrication for ultra-lightweight polyethersulfone/epoxy foam with excellent thermal insulation

Abstract

High-performance polymers find extensive applications in heat-resisting materials, aerospace, and automobile manufacturing industry. However, due to their challenging processability, achieving low-density high-performance polymer foams for thermal insulation materials remains a big challenge. Furthermore, the preparation of lightweight special engineering plastic foams has garnered substantial attention in current research. Herein, we have developed polyethersulfone (PES)/bisphenol A epoxy resin (EP) blend foams with ultra-low density and good thermal insulation properties using a facile and environmentally friendly supercritical CO2 (ScCO2) foaming approach. The inherent compatibility between PES and EP resin enhanced the free volume of molecular chain in the matrix, subsequently improving the solubility and diffusion rate of carbon dioxide within the PES matrix. Consequently, in contrast to the maximum expansion ratio of 5.5 observed in pure PES, the PES/EP blend foams achieved an expansion ratio of up to 26 times, along with an improvement of the cell structure of PES and increasing cell density from 2.55 × 109 to 2.96 × 1010 cells/cm3. Furthermore, the thermal conductivity of PES-based foams notably decreased from 0.0667 to 0.0348 W/(m·K) with the addition of EP, possibly resulting from the low density (0.05 g/cm3) and high open-cell content (79.9%) of PES/EP blend foam. Our work presents a novel strategy for producing special engineering plastic foams with ultra-low density for thermal insulation, thereby expanding the potential application of special engineering plastic foam in areas such as biological scaffolds, absorbent material applications, and automotive interior industry.