Abstract
We have studied a measuring method of a critical current (I/sub c/) for NbTi superconducting wires having a Cu matrix and Cu/CuNi matrices. To prevent the wires from prematurely quenching before reaching their I/sub c/, we tried grease impregnations to sample coils. When the NbTi/Cu wire was used for the coil, silicon grease impregnation was enough to fix the wire and to measure the I/sub c/ of the wire. In case that we used the NbTi/Cu/CuNi wire when measuring the I/sub c/, restraint of wire motion by the silicon grease impregnation was insufficient and the sample coil easily quenched before reaching the I/sub c/. Accordingly, the Apiezon/spl reg/ (type: M) grease was used for an impregnation material, and we found the Apiezon grease was effective in fixing the NbTi/Cu/CuNi wire.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.