Abstract
Molybdenum carbide (β-Mo2C) nanoparticles were synthesized in situ on a soft-templated graphitic mesoporous carbon (GMC) and other commercial carbon materials (activated charcoal and carbon black) by carbothermal hydrogen reduction (i.e., carbon supports as carburizing agents). The catalytic activity of these carbon-supported and bulk carbides for carbon monoxide (CO) hydrogenation to mixed alcohols (mainly C1–C3) was investigated at 573K and 3.0MPa, showing that their areal specific rates for CO conversion increase with decreasing the carbide particle size, independent of the supports. GMC appears to be a preferable support of β-Mo2C to activated charcoal and carbon black because of its ability for the formation of smaller carbide particles resulting in higher catalytic activity. Addition of a minor amount of K2CO3 into β-Mo2C/GMC (molar K/Mo=0.05−0.5) promotes the formation of higher alcohols (C2+–OH) considerably, leading to a maximum space time yield (STY) for C2+–OH at medium K/Mo ratio of 0.1. Compared with typical Rh/GMC catalyst promoted triply with Mn, Li, and Fe oxides, the K2CO3-promoted β-Mo2C/GMC catalyst shows higher C2+–OH selectivity (30 vs. 25mol-C% on CO2-free basis) and STY (71 vs. 46mg(hgcat)−1) in spite of its suppressed formation of CH3OH.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.