Abstract
Copper based composites with high graphite contents for pantograph sliders have been manufactured via an inexpensive powder metallurgy method. Large size cluster graphite is added into the matrix as solid lubricant to optimize the mechanical and wear performance of the composites. The mechanical performance and microstructure of graphite cluster/ copper-based (GC/Cu) composites are investigated. The highest graphite content in GC/Cu composites can reach up to 5wt%. The graphite cluster/copper-based composites show an outstanding mechanical performance, in which the impact toughness can reach 4.8J/cm2 with 5wt% graphite cluster. The matrix is constituted with single α-phase Cu10Sn3with second phase particles CuNi2Sn. Moreover, friction and wear behavior with or without electric currency have been explored systematically, which indicates that the friction coefficient with 5wt% graphite composites reached a minimum of 0.184at a load of 25N. It also exhibits the excellent friction performance under the effect of electric current. The smallest wear rate of 4.2×10−3 mg/m occurs in the sample with 2wt% graphite at 30 A. Meanwhile, the interaction between pantographs and contact wire has been investigated based on elemental analysis and surface morphology. Oxidation and material transfer is found on the worn surface.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
