Abstract
Here, a high breaking strength and high initial modulus fibers comprised of polyvinyl alcohol (PVA) and graphene oxide (GO) were fabricated via simple method of solution blending and wet-spinning. The structure and properties of these fibers were studied in details using two-dimensional X-ray diffractions, differential scanning calorimetry, one-dimensional X-ray diffractions, scanning electron microscopy, transmission electron microscopy, dynamic mechanical analysis and tensile test. Compared with pure PVA fiber, a 43 % improvement of breaking strength and an 81 % improvement of initial modulus were achieved by addition of 0.1 wt% of GO, and the results indicated that crystallization and orientation of GO/PVA composite fibers were both increased. GO could not only promote PVA chains ordered arrangement for increasing crystallization, but also act as a template for polymer amorphous orientation via the interactions between PVA and GO in the process of hot drawing and heat setting, which were responsible for the significant improvement in the mechanical properties of GO/PVA composite fibers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.