Abstract
In this study, nitrogen doped electrochemically exfoliated reduced graphene oxide and carbon black supported platinum (Pt/NrEGO2-CB3) has been prepared to enhance the performance and durability of high-temperature PEMFCs with lower Pt loading. On the one hand, Pt/NrEGO2-CB3 with the strong interaction between the Pt and nitrogen (N) prevent agglomeration of Pt particles and Pt particles is 5.46 ± 1.46 nm, which is smaller than that of 6.78 ± 1.34 nm in Pt/C. Meanwhile, ECSA of Pt/NrEGO2-CB3 decrease 13.65% after AST, which is much lower than that of 97.99% in Pt/C. On the other hand, the NrEGO flakes in MEAac act as a barrier to mitigate phosphoric acid redistribution, which improves the formation of triple-phase boundaries (TPBs) and gives stable operation of the MEAac with a lower decay rate of 0.02 mV h−1 within 100 h. After steady-state operation, the maximum power density of Pt/NrEGO2-CB3 (0.411 W cm−2) is three times higher than that of conventional Pt/C (0.134 W cm−2) in high-temperature PEMFCs. After AST, the mass transfer resistance of Pt/NrEGO2-CB3 electrode (0.560 Ω cm2) is lower than that in Pt/C (0.728 Ω cm2).
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
