Abstract

In this paper, the grain-refining effect of Al-Nb-B refiner in wrought Al alloys and corresponding refining mechanism was investigated using phase-field simulation and experiment methods. Through experimental statistics and data correction, the seed radius introduced by Al-Nb-B refiner into Al alloy melt and the corresponding quantitative density distribution data were obtained, and a seed density model (SDM) model has been established. On this basis, a multi-phase field method (MPFM) combined with the calculation of phase diagram (CALPHAD) has been employed to simulate the α-Al grain evolution of Al-Mg-Si alloy during the solidification process with the help of thermodynamic database. Experimental studies showed that the addition of 0.03 wt% Nb (Adding by Al-1.93Nb-0.22B master alloy) significantly reduced the grain size from 956.4 μm to about 219.4 μm, and the grain size slowly decreased to 192.3 μm by continuing to add refiner to 0.09 wt% Nb. Meanwhile, the simulation results demonstrated that after the addition of refiners, dendrite morphology transformed from the relatively developed dendrites with secondary and tertiary dendrites to a fine and uniform equiaxed shape. Simulation and experimental studies showed quantitative agreement. In addition, the results also prove that the addition of Al-Nb-B refiner can provide high-quality and stable heterogeneous nucleation particles.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call