Abstract
Two sintered magnets Nd15Dy1.2Fe77Al0.8B6 and Nd22Fe71B7 were modified by intergranular additions of Si3N4. The remanence as well as sintering density of the two magnets increased slightly with appropriate amount of Si3N4 additives. Meanwhile, there was an obvious increase in coercivity of the Nd-rich Nd22Fe71B7 magnet after 0.3 wt. % Si3N4 was added to magnets. Besides the effects on magnetic properties, an improved corrosion resistance was observed. Compared with the native magnets without any additions, corrosion potential of the magnets with Si3N4 additives is more positive and the current density in the anodic branch of the polarization curve is reduced. Microstructure observation reveals that Si3N4 additives have been incorporated into the intergranular phases in the magnets. Si is found to enrich in the Nd-rich intergranular phase with low oxygen content. With the introduction of Si3N4 additives, more intergranular phase with high oxygen content is formed, which may contribute to improved corrosion resistance. In addition, addition of Si3N4 refines the grain size of Nd22Fe71B7.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.