Abstract
Grain boundary devitrification was carried out on three Ca α-sialon ceramics with different grain sizes and morphologies and various amounts of grain boundary glass. The devitrified product was gehlenite in all samples, indicating that the crystallization of the Ca oxynitride glass was accompanied by a volume reduction. The volume reduction upon crystallization and the thermal expansion mismatch between the devitrified product and α-sialon grains would result in tensile residual stresses located at multi-grain junctions. These residual tensile stresses were expected to promote the crack deflection and bridging mechanism and thus to improve the material toughness. However, indentation fracture toughness measurement and scanning electron microscope study showed that there was no significant difference in fracture toughness and the fracture mode in present samples prior to and post heat treatment. This may be attributed to a change in the chemistry of the residual glass as a result of the grain boundary devitrification, which could enhance the bonding strength between the adjacent α-sialon grains. The enhanced bonding strength could have to some degree hindered the crack deflection and bridging mechanism.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
