Abstract
Lithium-ion batteries (LIBs) are one of the most promising energy storage systems for portable electronic devices, electric vehicles, and renewable energy systems. Among the various cathode materials for LIBs, nickel cobalt manganese (NCM) oxide has attracted considerable attention due to its high specific capacity, good cycling stability, and appropriate cost for commercialization. However, Ni-rich NCM (Ni >80%) showed poor cyclability and huge gas evolution because of surface instability.Single crystal NCM has been suggested as a solution to these issues due to its excellent properties. However, it is difficult to quantify the degree of single crystallinity because it is so far subjective. In this study, we employed ASTAR technique (transmission electron microscopy combined with electron backscatter diffraction) to investigate the microstructural features of NCM cathode materials. Our ASTAR analysis showed that NCM cathode materials consist of complex grain and grain boundary structures with varying orientations and sizes. By analyzing the grain size and its morphology, we were able to define the single crystallinity of NCM cathode materials, including the poly NCM and single crystal NCM particles.Furthermore, we found that the grain size and its distribution significantly affects the battery performance and lifespan of NCM cathode materials. Specifically, the poly NCM particles exhibited a larger grain boundary and surface area compared to the single crystal NCM particles. The poly NCM particles also showed a faster DC-IR increase and a shorter lifespan than the single crystal NCM particles, indicating that the grain size has a critical influence on the battery performance and lifespan of NCM cathode materials.Our results provide insights into the design and optimization of NCM cathode materials for next-generation LIBs. By controlling the grain size and its distribution of NCM cathode materials, it is possible to enhance the battery performance and lifespan. Therefore, our study highlights the importance of understanding the microstructural features of NCM cathode materials for developing high-performance and stable LIBs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.