Gradient doping of Cu(I) and Cu(II) in ZnO nanorod photoanode by electrochemical deposition for enhanced photocurrent generation

Abstract

This study describes the synthesis and characterization of Cu-doped ZnO nanorods (NRs) by an electrochemical method in the presence of two different Cu precursor (Cu+2 and Cu+) in order to improve photocurrent generation. Analyses of the resulting materials by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV–Vis and electrochemical photocurrent (ECP) spectroscopy confirm the formation of well-aligned ZnO Würtzite nanostructures in the form of hexagonal rods. For both doping source with a concentration of up to 0.5%, the following changes were observed: a distortion of the ZnO morphology, an increase in transmittance to 96% for ZnO doped with Cu+2, and a reduction of the energy gap from 3.36 eV to 3.06 and 3.02 eV for ZnO doped with Cu+2 and Cu+, respectively. From photoelectrochemical tests, the photo-current density was improved up to 0.05 mA cm-2 in the presence of Cu doping, which is twelve times superior to that of undoped ZnO nanorods, which means that the incorporation of Cu+2 or Cu + significantly improves the separation efficiency of photogenerated electron-hole pairs. These results can be considered promising for optoelectronic and photocatalysis applications.