Abstract

Improving the ductile deformation behavior of Mg-SiC nanocomposites without compromising strength is critical to enhancing their mechanical properties. Mg-SiC nanocomposites are produced through mechanical milling, cold isostatic pressing, sintering, and hot extrusion processes. This study investigates the uniaxial stress–strain response and deformation behavior of the Mg-SiC nanocomposite compared to pure Mg samples with and without the milling process. The deformation behavior was investigated by two-dimensional (2D) digital image correlation (DIC) at two macroscopic and microscopic scales, employing light micrographs and in situ loading samples, respectively, in the scanning electron microscope. Compared to the pure Mg samples, the mechanical test results demonstrated a significant improvement in strength (80 MPa) and fracture strain (23.5%) of the Mg-SiC nanocomposite. The three-dimensional (3D) representative volume element (RVE) model revealed the particle dispersion effect on the mechanical properties of the nanocomposite. The RVE results demonstrate ductile deformation behavior in the sample with homogenous dispersion of SiC particles compared with the heterogeneous dispersion of SiC particles in Mg-SiC nanocomposite. The results demonstrated a good agreement between DIC and RVE predictions for Mg-SiC nanocomposites across macro- and microscales.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call