Glenoid Diameter Is an Inaccurate Method for Percent Glenoid Bone Loss Quantification: Analysis and Techniques for Improved Accuracy

Abstract

To compare diameter-based glenoid bone loss quantification with a true geometric calculation for the area of a circular segment. By use of Maxima 12.01.0 mathematics modeling software (Macysma, Boston, MA), the diameter-based glenoid bone loss equation (% Bone loss= [Defect width (w)/Inferior glenoid circle diameter (D)]× 100%) was compared with a true geometric calculation for the area of a circular segment of the glenoid (Wolfram Research, Champaign, IL) rearranged in terms of w and D: Percent bone loss= (100/2π) (2× arccos [1- 2 (w/D)]- sin {2× arccos [1- 2 (w/D)]}). Percent error was calculated by taking the difference between the diameter equation and the true geometric calculation at varying true glenoid defect widths (w) (0% to 50% of diameter). The commonly used diameter equation overestimated true glenoid bone loss at all values of w except at 0% and 50% of the diameter. The mean overestimation error was 3.9% ± 1.9% (range, 0.0% to 5.8%), with the maximum error occurring when w was 20% of the diameter: At this value, w/D× 100% (diameter equation) predicts 20% bone loss when true bone loss is actually 14.2%. Diameter-based glenoid bone loss quantification overestimates true glenoid bone loss, with the maximum error occurring when theorized bone loss is 20%. To address situations for which a diameter-based bone loss quantification method must be performed or to improve the accuracy of surface-area calculations in previous diameter-based bone loss estimations, a corrective factor can be applied. Clinicians quantifying glenoid loss to make treatment decisions should be aware of the measurement methods used in the biomechanical studies on which they are basing their surgical decisions. Diameter-based glenoid bone loss quantification overestimates true glenoid bone loss, with the maximum error occurring when theorized bone loss is 20%, a commonly used threshold forbone grafting.