Glazing systems with silica aerogel for energy savings in buildings

Abstract

Innovative glazing systems with silica aerogel in interspace were investigated for energy saving in buildings. Aerogel is a promising transparent insulating material, due to its low thermal conductivity (down to 0.010Wm−1K−1), high solar factor, high daylight transmittance and remarkable lightweight. Four samples were constructed with float and low-e glasses and granular or monolithic aerogel in interspace (14mm thickness). The main optical characteristics of the samples were measured, in order to estimate the light transmittance τv, the solar factor g and the colour rendering index Ra, in compliance with EN 410/2011. Finally, the thermal transmittance was calculated. The monolithic aerogel glazings showed the best performance with respect to granular systems, both for light transmittance (0.62 between two 4mm float glasses) and thermal insulation (0.6Wm−2K−1). The solar factor was 0.74. Results showed a very promising behaviour of aerogel windows when compared to the windows normally used in Italy and in EU countries: monolithic aerogel between two 4mm float glasses gave a 62% reduction in heat losses, with a 17% reduction in light transmittance when compared to a double glazing with a low-e layer; a high solar factor and colour rendering were also assured.