GIS mapping used as supplementary tool to experimentally investigated subgrade soil for robust pavement design in rural area of Ethiopia

Abstract

PurposeThis paper aims to present physical and geotechnical study in terms of experimental field and laboratory investigations of the subgrade soils in severely damaged and highly degraded road section with numerous potholes between Chencha to Ezo towns of Ethiopia needs to be addressed for a robust pavement.Design/methodology/approachEighteen soil samples were collected from 18 km road stretch at a kilometer interval by considering variation and composition of soils along the road alignment. The field density with dry density, natural moisture content, consistency limit, compaction and California Bearing Ratio (CBR) were determined.FindingsSoils were classified predominantly as silty-clay that replicates its expansive nature, characterized as bad to medium subgrade. The average optimum moisture content and maximum dry density are 17.18% and 1.83 g/cc, whereas the average CBR and swell as 8.40% and 1.49%, respectively. The investigated results indicated that the indispensable way for a stable and durable road subgrade in the existing silty clayey soil requires a capping layer. The results were uploaded into ArcGIS platform to create interactive maps for spatial distribution, composition and strength of the subgrade properties.Originality/valueExperimental investigation of subgrade soils by scientific procedures and presenting important properties through integrated approach using ArcGIS Mapping for the road pavement design and construction purpose of under developed areas like Chencha-Ezo. ArcGIS-based mapping of all required and numerical subgrade properties with a single click using ArcGIS tool is the main significance and contribution of this study. To the best of the authors’ knowledge, this paper is original, and all the references are properly cited.