Abstract
Geothermal energy production consists of two main types: low temperature or low enthalpy for temperatures below 150ºC, and high temperature or high enthalpy systems for temperatures over than 150ºC. In mainland Portugal the most common ground temperature varies from 20 to 40ºC, depending on the place where the geothermal boreholes are placed, which means that low enthalpy systems can be considered. Currently the increased development of ground source heat pumps (GSHP) lead to a continuous development and innovation of ground heat exchangers (GHE). The geothermal systems can contribute with savings between 25-75% of the energy demands of buildings’ HVAC systems, making it a very appealing solution mainly in northern and central Europe. The goal of this paper is to analyse the performance of a geothermal system installed in a department of the University of Aveiro, in the center of Portugal. Firstly, an introduction about different GHE systems is done and after a real case study is described and the methodology applied. To achieve the goal established, the building was analysed, audit and modeled, and an energy simulation was carried out with EnergyPlus® 8.6 (EP) software. After the results obtained it can be concluded that even in regions with mild climate as Aveiro, the geothermal system contributes with 34% of savings of the annual global primary energy needs.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
