Abstract
The research focuses on the basic and morphological characteristics to ensure bauxite ore reached the International Maritime Solid Bulk Cargoes Code (IMSBC Code) standard before being exported to other countries. The testing procedure, referred to as Geo-spec 3: Model Specification for Soil Testing, was performed to discover the basic parameters of the soil, including pore size distribution, water content, particle density, and morphology qualities. At Bukit Goh, Kuantan, about four (4) samples were chosen, whereas two (2) samples were from the stockpile and two (2) samples were from the Bukit Goh mine. The results illustrated that the mean water content of the soil is 20.64% which is above 10% of the recommended value. The value of Bulk Density is not in the range of 1190 kg/m3 to 1389 kg/m3, which is 2836.25 kg/m3 and the particle size distribution for fine material is greater than 30%, and coarse material is less than 70%. The SEM examination revealed a high concentration of tiny particles in bauxite samples. Bukit Goh bauxite cannot be classified as group C under the IMSBC Code. As a result, the bauxite does not meet the criteria and cannot be shipped.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
