Abstract
Abstract The NGI method of characterizing joints (using JRC, JCS and ø r ) and characterizing rock masses (using the Q-system) have been and are currently being used extensively in geotechnical consultancy projects. One such project recently completed for UK Nirex Ltd included the logging of 8 km of 100-mm-diameter drill core from boreholes up to 2 km in depth. Preliminary rock reinforcement designs were derived from the Q-system statistics, which were logged in parallel with JRC, JCS and ø r . The data from the NGI method of characterizing joints and the Q-system for characterizing rock masses have also been used as the basis for UDEC-BB numerical modelling of the proposed cavern excavations for the disposal of solid, low- and intermediate-level radioactive wastes. The purpose of this numerical modelling was to investigate the stability of rock caverns and in particular the rock reinforcement requirements (giving predicted bolt loads and rock deformations), the extent of the disturbed zone (joint shearing and hydraulic aperture) with respect to cavern orientation, the effect of various pillar widths, and the effect of the cavern excavation sequence.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
