Abstract
Gravity retaining structures in gabion walls were built in the outdoor area of a shopping centre in the city of Manaus, State of Amazonas, Brazil. When the project was about half-way completed, horizontal displacements began to show excessive ‘bulging’, causing the stoppage of construction. Later studies revealed that the original geometric sections did not meet the requirements of internal, external and global geotechnical stability. Hence, it was necessary to study some alternatives to circumvent the problem. The fastest and most economical alternative proved to be increasing the cross-section of the walls, through the excavation of the backfill. The reconstruction of the walls and subsequent backfill compaction were performed step by step. The new cross-sections of the walls improved their theoretical and constructive stability, and this was proven by subsequent monitoring of horizontal and vertical displacements. It was found that the largest horizontal and vertical displacements of the gabion wall were about 20 mm and 11 mm, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.