Abstract
The suitability of damage–force maps for characterising low velocity impact damage in a glass fibre reinforced polyester composite has been investigated at low and intermediate energies. Tests were undertaken on circular plates with diameters ranging between 50 and 300 mm and on square plates with edge lengths of 75 and 200 mm. Damage took the form of delamination under the point of impact and more widespread matrix cracking. The translucent nature of the composites facilitated the determination and quantification of the extent of damage within each specimen. Plots of delaminated area against impact force yielded maps in which the experimental data lay within a narrow band over the range of conditions examined. For a given impact energy, the impact force was greater and damage was more severe in smaller coupons. The damage–force maps suggested that the impact force to generate delamination lay between 600 and 800 N in spite of the fact that largest structure was over 35 times larger than that of the smallest structure investigated. An energy–balance model was used to successfully predict the impact response of the circular structures and to predict the onset of damage within these composite plates.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.