Abstract

The purpose of this study was to characterize the accuracy of a novel in-house optical tracking system (OTS), and to determine its efficiency for daily pre-treatment positioning of pelvic radiotherapy patients compared to conventional optical distance indicator (ODI) methodology. The OTS is comprised of a passive infrared stereoscopic camera, and custom control software for use in assisting radiotherapy patient setup. Initially, the system was calibrated and tested for stability inside a radiation therapy treatment room. Subsequently, under an ethics approved protocol, the clinical efficiency of the OTS was compared to conventional ODI setup methodology through 17 pelvic radiotherapy patients. Differences between orthogonal source-to-skin distance (SSD) readings and overall set-up time resultant from both systems were compared. The precision of the OTS was 0.01 ± 0.01 mm, 0.02 ± 0.02 mm, and -0.01 ± 0.06 mm in the left/right (L/R), anterior/posterior (A/P), and cranial/caudal (C/C) directions, respectively. Discrepancies measured between the linac radiographic center in the treatment room and the calibrated origin of the camera (OTS) by two independent observers was submillimeter. Analysis of 146 fractions from 17 patients showed a high correlation between the SSD readings of the OTS and ODI setup methodologies (r = 0.99). The average time for pre-treatment positioning using the OTS couch shift calculation was 2.60 ± 0.69 minutes, and for conventional ODI setup, 3.62 ± 0.82 minutes; the difference of 1.02 minutes was statistically significant (p < 0.001). In conclusion, the OTS is a precise and robust tool for use as an independent check of treatment room patient positioning. The system is indicated as geometrically equivalent to current methods of daily pre-treatment patient positioning with potential for gains in efficiency by decreasing setup times in the treatment room.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call