Geological exploration of coal mine burnt rock and waterlogged area boundary based on transient electromagnetic and high-density electrical resistivity

Abstract

The water-rich burnt rock may threaten the safe production of coal mines. Identifying the boundaries of burnt rock and the water-rich area is of great practical significance for the ensuring the safety of mining operations. Transient electromagnetic and high-density resistivity methods are commonly employed in geophysical exploration, such as for investigating the presence of groundwater or delineating boundaries of altered rocks. These methods are non-invasive and provide detailed information about subsurface conditions without the need for drilling or excavation. The Jiangjun Gobi No. 1 open-pit coal mine is situated in the Kalamaili fault zone and is characterized by a high groundwater content. In certain mining sites within the study area, the inflow of water reaches tens of thousands of cubic meters per day, which significantly impacts production and presents major risks. To accurately determine the boundaries of burnt rock and water accumulation areas in the Jiangjun Gobi No. 1 open-pit coal mine, this paper uses different geophysical prospecting methods based on the depth of the strata. The middle and deep parts are investigated using the high-resolution transient electromagnetic method, while the shallow parts are examined using the high-accuracy high-density electric method. Through analyzing the electrical characteristics of the study area, it is inferred that the low-resistivity area in the northwest represents a shallow surface water-rich region. This area extends continuously towards the northwest, is not trapped, and is supplied by surface water. The deep low-resistivity zone primarily consists of sandstone and coarse sandstone. It is inferred that the low-resistance area in the southern part of the study area is also a shallow surface water-rich region, extending towards the east and west sides, not trapped, and supplied by surface water. The deep low-resistivity zone mainly comprises a combination of sandstone, coarse sandstone, and burnt rock, with intermittent layers of mudstone and argillaceous sandstone. The boundary line of burnt rock (coal-bearing strata) is located in the south of the study area. The resistivity of burnt rock (coal-bearing strata) is higher than that of the surrounding rocks, and the resistivity of coal seams is slightly higher than that of sandstone with larger porosity. Estimating the boundaries of groundwater and altered rocks serves to prevent geological disasters and provides valuable information for mineral development and ecological protection.