Abstract

A nationwide investigation was carried out to evaluate the geochemical characteristics and environmental impacts of red mud and leachates from the major alumina plants in China. The chemical and mineralogical compositions of red mud were investigated, and major, minor, and trace elements in the leachates were analyzed. The mineral and chemical compositions of red mud vary over refining processes (i.e., Bayer, sintering, and combined methods) and parental bauxites. The main minerals in the red mud are quartz, calcite, dolomite, hematite, hibschite, sodalite, anhydrite, cancrinite, and gibbsite. The major chemical compositions of red mud are Al, Fe, Si, Ca, Ti, and hydroxides. The associated red mud leachate is hyperalkaline (pH > 12), which can be toxic to aquatic life. The concentrations of Al, Cl−, F−, Na, NO32−, and SO42− in the leachate exceed the recommended groundwater quality standard of China by up to 6637 times. These ions are likely to increase the salinization of the soil and groundwater. The minor elements in red mud leachate include As, B, Ba, Cr, Cu, Fe, Ni, Mn, Mo, Ti, V, and Zn, and the trace elements in red mud leachate include Ag, Be, Cd, Co, Hg, Li, Pb, Sb, Se, Sr, and Tl. Some of these elements have the concentration up to 272 times higher than those of the groundwater quality standard and are toxic to the environment and human health. Therefore, scientific guidance is needed for red mud management, especially for the design of the containment system of the facilities.

Highlights

  • Red mud is an insoluble residue produced by aluminum oxide refining process with the characteristics of very fine particle size and high alkalinity [1]

  • The chemical and mineralogical compositions of red mud in China from this study and the literature are summarized in Tables 3 and 4, respectively

  • Na mainly comes from the sodium hydroxide (NaOH), which is used to treat bauxite, while Al, Si, Fe, Ti, and other elements are derived from the parental bauxite

Read more

Summary

Introduction

Red mud is an insoluble residue produced by aluminum oxide (alumina) refining process with the characteristics of very fine particle size and high alkalinity [1]. In 2015, 274 million tons of bauxite ore were mined globally for alumina production, with Australia (33%), China (20%) and Brazil (16%) being the leading bauxite producers in the world [2]. 60 million tons of red mud is produced each year globally, with 6 million tons of red mud occurring in China. Approximately 85% of the red mud is stored in the on-site reservoirs near the alumina refining plant. The reservoir is constructed with dams for containment purposes, and the red mud is treated by a natural settlement process [3]. Manufacturers often adopt the chemical ore dressing process for alumina refining

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call