Abstract
It is essential to set up the activated tungsten inert gas (A-TIG) welding process parameters to produce the desired weld bead geometry and heat affected zone (HAZ) width in modified 9Cr–1Mo steel weld joints. Therefore, it becomes necessary to develop a tool for optimisation of A-TIG welding process. Genetic algorithm (GA) based model has been developed to determine the optimum process parameters. In this methodology, first independent ANN models correlating depth of penetration, weld bead width and HAZ width with current, voltage and torch speed respectively were developed. Then, GA code was developed in which the objective function was evaluated using the ANN models. There was good agreement between the target and actual values of bead geometry and HAZ width obtained using the GA optimised process parameters. Thus, a methodology using GA has been developed for optimising the A-TIG process parameters for modified 9Cr–1Mo steel.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.