Generic method for systematic phase selection and method development of biochromatographic processes: Part I. Selection of a suitable cation-exchanger for the purification of a pharmaceutical protein

Abstract

Even if the first protein therapeutics are now for more than 20 years on the market the selection of suitable adsorbents for the preparative downstream processing (DSP) of these biomolecules as well as the method development towards process conditions are still based mainly on ‘trial and error’. Therefore, theses processes are not perfectly efficient, but indeed very time consuming and laborious. In this study a novel systematic method is introduced to find a suitable adsorbent (not necessarily the best one) with appropriate separation parameters for a specific separation with reduced effort. Following this strategy, the adsorbents must first be packed into columns under preparative conditions and then characterized completely with regard to, e.g. pressure drop, k′-values, plate heights (HETP curves), selectivity and capacity by using test substances, which are similar in their characteristics (molecular mass, size, charge distribution, hydrophobicity) to the target proteins. With the database once determined, a preselection of most suitable adsorbents including separation parameters is made regarding chromatographic and also economical properties. After this, preparative experiments must be conducted with a reduced number of adsorbents to figure out the individual influence of side components. This approach is demonstrated for the separation of an exemplary industrial protein mixture using cation-exchange chromatography (CEX). Characterization of different weak CEX-adsorbents is illustrated. After comparing these phases with each other, a first preselection and a prediction of suitable adsorbents is made. In the following preparative separation conditions (load, velocity, gradient) are determined for the preparative separations using the database and results of some additional experiments. The final comparison of separation performance in preparative scale confirms this selection and so the applicability of the new method.