Abstract
Differential-mode inverter topologies are promising for renewable energy generation since they offer advantages such as passive elements sizes reduction, having decreased power losses and reduced total cost. Single phase buck-boost differential-mode current-source inverters (DMCSIs) can deliver wider range of output voltage above or below the input dc voltage, which is necessary for high-efficiency modern renewable energy applications. Since these inverters have continuous input currents, they are suitable for maximum power point tracking (MPPT) operation of photovoltaic systems. Yet, the investigation, operation and implementation of these types of inverters have not been extensively discussed. As a drawback, the total dc side input current of a single-phase inverter consists of a dc component and an undesirable ac component. This ac component frequency is double the output voltage frequency and thus it affects MPPT resulting in reduced total efficiency. In this study, five promising DMCSIs are proposed and compared in terms of their total efficiencies, high-frequency ripple current in the dc side, total harmonic distortion, devices sizes and ratings. Moreover, the sliding mode controller's design and possible methods of eliminating the input second harmonic current are discussed. 2.5 kW bidirectional inverters are implemented to confirm the design flexibility of the proposed DMCSIs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.