Abstract
ABSTRACTResidual stresses are created in type 316H stainless steel fracture mechanics specimens using the process of local out‐of‐plane compression (LOPC). Three sets of LOPC tools are used to create different distributions of residual stress near to the crack tip. Also the tools create different levels of prior plastic strain. Residual stresses are measured using the neutron diffraction method and compared with the stress predictions obtained from finite element (FE) simulations of LOPC. The specimens are then subjected to thermal exposure at 550 °C for several thousand hours. A creep deformation and damage model is introduced into the FE analysis to predict the relaxation of stresses and creation of damage in the specimens. Neutron diffraction experiments are undertaken to measure the relaxed residual stresses and fractographic analysis of thermally exposed samples measured the extent of creep damage. A comparison between measured and simulated results demonstrates that the prior plastic strain has a significant effect on damage accumulation but this is not accounted for in the current creep damage models.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Fatigue & Fracture of Engineering Materials & Structures
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
