Abstract
We propose a novel method for efficient production of microbubbles based on a tapered capillary with an interiorly attached filament. When gas–liquid displacement driven by an input pressure occurs in the capillary, the gas cone ruptures close to the orifice of the capillary. The generated microbubbles can be pushed out of the capillary and collected by a liquid tank when the pressure is appropriately selected. A liquid column is employed in the straight part of the capillary, which can sustain the liquid film near the capillary orifice and hence the bubble generation by transporting liquid along the filament. Within the working pressure range, increasing the input air pressure leads to a decrease in the microbubble diameter. The minimum diameter of the microbubbles is approximately equal to the orifice diameter of the tapered capillary. In our experiments, microbubbles with a minimum diameter of 1.56 μm can be realized. Theoretically, we derive a one-dimensional unsteady lubrication equation describing the evolution of the gas–liquid interface in a tapered tube. The bubble pinch-off is justified by the numerical solution of the lubrication equation. In particular, the predicted bubble diameters are in agreement with the experimental measurements.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.