Abstract
A low-pressure gas discharge is presented as a source of intense pulsed electron beams. The pseudospark discharge emits a short-duration pinched electron beam during the breakdown phase. At voltages of typically 20 kV, approximately 10-20% of the total discharge current appears as the electron-beam current of typically 20 ns in duration. According to the breakdown voltage in the beam, a power density on the order of 10/sup 9/ W/cm/sup 2/ is reached. Thus, this electron beam turns out to be a good tool for material processing, comparable to pulsed high-power lasers. Besides the drilling of holes into metals and insulators, an interesting application is the production of high-temperature superconducting thing YBa/sub 2/Cu/sub 3/O/sub 7-x/ films. The electron beam is used to evaporate material from a stoichiometric 1-2-3 target. Experimental results concerning the propagation behavior in neutral gas, the electron energy distribution, and the interaction with matter are reported.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
