Abstract
High-contrast, 30 fs, 1.5 PW laser pulses are generated from a chirped-pulse amplification (CPA) Ti:sapphire laser system at 0.1 Hz repetition rate. The maximum output energy of 60.2 J is obtained, at a pump energy of 120 J, from a booster amplifier that is pumped by four frenquency-doubled Nd:glass laser systems. During amplification, parasitic lasing is suppressed by index matching fluid with absorption dye and the careful manipulation of the time delay between the seed and pump pulses. An amplified pulse passes through a pulse compressor consisting of four gold-coated gratings. After compression, the measured pulse duration is 30 fs, and the output energy is 44.5 J, yielding a peak power of about 1.5 PW. The output energy of 44.5 J and output power of 1.5-PW are the highest values ever achieved from the femtosecond CPA Ti:sapphire laser system. To maintain a sufficiently high temporal contrast, a saturable absorber is installed in the front-end system with two ultrafast Pockels cells in order to minimize the amplified spontaneous emission (ASE) and pre-pulse intensity. An adaptive optics system is implemented for PW laser pulses and a focused intensity of about 1 × 10(22) W/cm(2) can be obtained when an f/3 optic is used.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
