Generation of GHz surface acoustic waves in (Sc,Al)N thin films grown on free-standing polycrystalline diamond wafers by plasma-assisted molecular beam epitaxy

Abstract

Abstract Telecommunication of the next generation demands filters that can operate in the 10 GHz range with sufficient bandwidths. For surface-acoustic-wave (SAW) devices this prerequisite translates into high sound velocities and high piezoelectric couplings. Wurtzite AlN on diamond, which exploits the strong piezoelectricity of AlN with the very high SAW velocity of diamond, has been considered a promising platform. A significant boost (up to a factor of 4) of the piezoelectric response can be obtained by alloying AlN with Sc. Here, the main challenge lies in the synthesis of highly-oriented thin (Sc,Al)N films on diamond. In this work, we aim at establishing a platform for SAW devices using plasma-assisted molecular beam epitaxy for the deposition of Sc0.2Al0.8N on diamond. We investigate the structural properties related to SAW generation gearing towards applications at high frequencies. To this end, we prepare (Sc,Al)N thin films using plasma-assisted MBE on polished polycrystalline diamond wafers and demonstrate the efficient generation of SAW modes with frequencies up to 8 GHz. Systematic studies of the dependence of the SAW velocity and electromechanical coupling coefficient on the Sc0.2Al0.8N film thickness is presented for various SAW modes. Our result demonstrates the potential of this material combination for future application that requires large bandwidth in the ultra-high frequency range.