Generating terahertz multiple vortex beams using graphene metasurfaces

Abstract

This paper investigates the generation of orbital angular momentum vortex beams using a graphene metasurface in the terahertz frequency band. The proposed design consists of 20 × 20 unit-cell elements to operate in 1.2 THz applications. Each element is a graphene ring patch printed on a silicon dioxide substrate backed with a polysilicon ground plane of size 75 × 75 × 25 µm3. The graphene reconfigurable surface conductivity is used to control the beam shape, direction, and directivity radiated from the metasurface, through the application of DC biasing voltages. A parametric study on the effect of graphene chemical potential, relaxation time and temperature on the unit-cell reflection properties is introduced. The reflection magnitude varies from − 2.1 dB to -0.8 dB with a 350-degree phase variation for µc ranging from 0.25 eV to 1.6 eV at \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\ au$$\\end{document} =5 ps, and T = 300 K. The effect of graphene relaxation time from 0.3 ps to 10 ps on the reflection coefficient at µc = 0.7 eV, and T = 300 K is investigated. The metasurface radiation characteristics are investigated under the illumination of two types of incidence sources, plane-wave, and focused-waves. A depiction of a single vortex beam in various orientations θ = 0, 30o, 50o, and 70o, φ = 90o for l = 1 is presented. The purity of the OAM single beam shows that 94% of the power is concentrated in the designed mode. A graphene metasurface can to convert linearly polarized input into multiple beams exhibiting orthogonal modes. Two/four vortex beams in different directions are demonstrated. The capacity for wireless communication in the terahertz band can be enhanced by utilizing a graphene metasurface.