Abstract

We report zero-th and high-order acoustic Bessel beams with broad depth-of-field generated using acoustic holograms. While the transverse field distribution of Bessel beams generated using traditional passive methods is correctly described by a Bessel function, these methods present a common drawback: the axial distribution of the field is not constant, as required for ideal Bessel beams. In this work, we experimentally, numerically and theoretically report acoustic truncated Bessel beams of flat-intensity along their axis in the ultrasound regime using phase-only holograms. In particular, the beams present a uniform field distribution showing an elongated focal length of about 40 wavelengths, while the transverse width of the beam remains smaller than 0.7 wavelengths. The proposed acoustic holograms were compared with 3D-printed fraxicons, a blazed version of axicons. The performance of both phase-only holograms and fraxicons is studied and we found that both lenses produce Bessel beams in a wide range of frequencies. In addition, high-order Bessel beam were generated. We report first order Bessel beams that show a clear phase dislocation along their axis and a vortex with single topological charge. The proposed method may have potential applications in ultrasonic imaging, biomedical ultrasound and particle manipulation applications using passive lenses.

Highlights

  • We report zero-th and high-order acoustic Bessel beams with broad depth-of-field generated using acoustic holograms

  • We show the Bessel beam produced by a binary-amplitude grating[40], which is equivalent to a Soret-type Zone Plate lens[69]

  • As the total surface of each annular area varies with the radial coordinate, the intensity radiated by each annulus depends linearly with the distance to the centre

Read more

Summary

Introduction

We report zero-th and high-order acoustic Bessel beams with broad depth-of-field generated using acoustic holograms. There exist many methods to generate zero-th and high-order Bessel beams While, as mentioned, they cannot be ideally generated in practice, several methods have been proposed to generate truncated Bessel beams. In analogy to Fresnel lenses, are stepped phase plates able to produce a similar conical wavefront due to the refraction along its sawtooth-shaped profile. In this way, the thickness of the lens can be strongly reduced[39]

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call