Generalized Fault-Tolerance Topology Generation for Application-Specific Network-on-Chips

Abstract

The Network-on-Chips is a promising candidate for addressing communication bottlenecks in many-core processors and neural network processors. In this work, we consider the generalized fault-tolerance topology generation problem, where the link or switch failures can happen, for application-specific network-on-chips (ASNoC). With a user-defined number, K, we propose an integer linear programming (ILP) based method to generate ASNoC topologies, which can tolerate at most K faults in switches or links. Given the communication requirements between cores and their floorplan, we first propose a convex-cost-flow based method to solve a core mapping problem for building connections between the cores and switches. Second, an ILP based method is proposed to allocate K+1 switch-disjoint routing paths for every communication flow between the cores. Finally, to reduce switch sizes, we propose sharing the switch ports for the connections between the cores and switches and formulate the port sharing problem as a clique-partitioning problem Additionally, we propose an ILP-based method to simultaneously solve the core mapping and routing path allocation problems when considering physical link failures only. Experimental results show that the power consumptions of fault-tolerance topologies increase almost linearly with K because of the routing path redundancy. When both switch faults and link faults are considered, port sharing can reduce the average power consumption of fault-tolerance topologies with K = 1, K = 2 and K = 3 by 18.08%, 28.88%, and 34.20%, respectively. When considering only the physical link faults, the experimental results show that compared to the FTTG algorithm, the proposed method reduces power consumption and hop count by 10.58% and 6.25%, respectively; compared to the DBG based method, the proposed method reduces power consumption and hop count by 21.72% and 9.35%, respectively.