General method of extreme surfaces for geometry optimization of the linear electro-optic effect on an example of LiNbO3:MgO crystals.

Abstract

A general method for determining the global maximum of the linear electro-optic effect in crystalline materials based on the construction and analysis of extreme surfaces obtained as a result of the optimization procedure is proposed. The electrically induced optical path length changes for ordinary and extraordinary waves as well as the optical path difference for orthogonally polarized waves were used as the objective functions in the optimization. The objective functions were determined for units of the electric field and crystal thickness in the light pass direction. In the example of LiNbO3:MgO, it is shown that the maximal achievable given values of the optical path length change (global maxima) for ordinary and extraordinary waves are 119pm/V and 277pm/V, respectively. The global maximum of the optical path difference for orthogonally polarized waves is 269pm/V (for 632.8nm wavelength and at room temperature). These global maxima are exceeded by ∼1.5, 1.7, and 2.3 times the respective maximum values on direct cut crystals of LiNbO3:MgO and are ∼5%, 9%, or 11% larger than the global maxima for undoped LiNbO3 crystal. This ensures a possibility to increase the energy efficiency by ∼2.9 or 5.3 times in the case of using of LiNbO3:MgO crystals with optimal cuts as sensitive elements of electro-optic devices.