Gelatinisation Properties of Cassava Starch in the Presence of Salts, Acids and Oxidising Agents

Abstract

AbstractThe effect of various cations, anions, acids and oxidising agents on the gelatinisation properties of cassava starch was studied and wide variation was observed in the pasting and swelling properties. Sodium chloride and sodium thiosulphate slightly lowered the peak viscosity of cassava starch with increase in concentration, whereas with sodium sulphite, calcium chloride and sodium hypochlorite, a more significant decrease in the viscosity and breakdown was observed. Ferrous sulphate, alum, aluminium chloride and acids enhanced the peak viscosity at lower concentrations followed by a decrease at 1% and above. Sodium metabisulphite elevated the viscosity at 0.05 and 0.1%, while sodium hypochlorite lowered the viscosity and breakdown. DSC studies showed that aluminium chloride, sodium sulphite, and sodium thiosulphate brought about an increase in Tonset, Tend and ΔH values at higher concentrations. A decrease in swelling volume was observed from 0.05 to 1% concentration of sodium chloride and above that there was a gradual increase. With sodium sulphite, a significant increase in swelling volume was observed at 2.5 and 5% levels. With 0.05 and 0.1% aluminium chloride and sodium metabisulphite an increase in swelling volume was noticed, but at higher concentrations there was a drastic fall. Sodium chloride, sodium sulphite, sodium thiosulphate and calcium chloride brought about decrease in starch paste clarity with increase in salt concentration, whereas ferrous sulphate, aluminium chloride, sodium hypochlorite, hydrochloric acid and acetic acid improved the starch paste clarity.