Gear Shape Measurement Potential of Laser Triangulation and Confocal-Chromatic Distance Sensors

Abstract

The demand for extensive gear shape measurements with single-digit µm uncertainty is growing. Tactile standard gear tests are precise but limited in speed. Recently, faster optical gear shape measurement systems have been examined. Optical gear shape measurements are challenging due to potential deviation sources such as the tilt angles between the surface normal and the sensor axis, the varying surface curvature, and the surface properties. Currently, the full potential of optical gear shape measurement systems is not known. Therefore, laser triangulation and confocal-chromatic gear shape measurements using a lateral scanning position measurement approach are studied. As a result of tooth flank standard measurements, random effects due to surface properties are identified to primarily dominate the achievable gear shape measurement uncertainty. The standard measurement uncertainty with the studied triangulation sensor amounts to >10 µm, which does not meet the requirements. The standard measurement uncertainty with the confocal-chromatic sensor is <6.5 µm. Furthermore, measurements on a spur gear show that multiple reflections do not influence the measurement uncertainty when measuring with the lateral scanning position measurement approach. Although commercial optical sensors are not designed for optical gear shape measurements, standard uncertainties of <10 µm are achievable for example with the applied confocal-chromatic sensor, which indicates the further potential for optical gear shape measurements.