Abstract
The objective of this study was to test the performance of a traditional gate-flushing device and a newly designed vacuum-flushing device in removing sediment from combined sewers and CSO storage tanks. A laboratory hydraulic flume was used to simulate a reach of sewer or storage tank. The flushing device was fabricated and installed at upstream end of the flume. The removed sediment was collected at downstream end of the flume and weighed. The test results indicate that the weight of flushed sediment increases with increasing initial water depth in the flushing device; the weight of flushed sediment decreases with increasing initial water depth in the flume; the weight of flushed sediment only changes slightly with changing height of flushing device opening for water release and does not necessarily increase with increasing opening height. Water is held up by vacuum and is released upon dissipation of the vacuum in the vacuum-flushing device rather than through closing and opening of a mechanical gate in the gate-flushing device. The test results indicate that sediment removal efficiency of the vacuum-flushing device is practically the same as the gate-flushing device.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.